In what circumstances should I set the pin to auto-calibration?
tina
Posted: 16.08.2024 17:59
Modified: 07.10.2024 13:04
Hi techsupport,
I read in the manual that you can set the first pin from manual (default) to auto-calibration.
In what situations (examples) is this useful or recommended?
As I also read that the device is factory-calibrated and you just need to calibrate it once a year.
aranet-techsupport
Posted: 16.08.2024 18:40
AUTO calibration is not recommended if the environment in which Aranet4 resides is not close to 420ppm.
Our general recommendation is to calibrate once a year using MANUAL calibration while exposing Aranet4 to an environment as close to 420ppm as possible.tina
Posted: 16.08.2024 18:53
Modified: 16.08.2024 19:03
Thank you, that is very reassuring. I want to express my compliments for your forum-support. All my questions were answered on the same day and on point. That is great customer service and highly appreciated!
aranet-techsupport
Posted: 16.08.2024 18:54
Thank you for your kind words and thank you for choosing Aranet!
You have to log in to reply.