Reflashing Firmware at Home
davepage_mcr
Posted: 23.07.2024 18:52
Modified: 07.09.2024 18:35
I have an Aranet 4 Home device, which has the same failure seen in other posts on this forum - the e-ink screen is stuck on the "dead battery" logo, even after days with no battery in. Putting fresh batteries in give a brief red light flash from behind the battery compartment, indicating a firmware load error.
Do I need to RMA it, or is there a way as a home user I could open up the device and re-flash the firmware myself, perhaps using a JTAG header or similar?
aranet-techsupport
Posted: 24.07.2024 09:00
Hi!
Please fill out the RMA form: https://rma.aranet.com/
You have to log in to reply.