There is an error message on the Aranet4 screen. What does it mean?

• 

  aranet-techsupport

  Posted: 02.07.2020 17:46

  Modified: 21.11.2024 04:39

  There are three kinds of error messages that can appear on the screen of the device:

  Error Code	Solution
  0x8001 – 0x8005 0x800E – 0xFFFE	Fill the RMA form
  0x8106 or 0ppm or 9999ppm	Manually re-calibrate the CO2 sensor If the problem persists, fill the RMA form

   
• 

  kelvinward

  Posted: 05.06.2022 10:37

  Hi,

  I have an error message on my Aranet4 "Error 0x8002"

  I have taken the batteries out, replaced and then re-calibrated the device. It started to work for a short time only to quickly go back to displaying the error messgae.

  Can you please advise on what I should do.

  I am not aware that there has been any damage to the device.

  Thanks

  Kelvin Ward

  kelvinward@pm.me

   
• 

  aranet-techsupport

  Posted: 06.06.2022 08:05

  Hi Kelvin,

  Your sensor needs repair, please fill out RMA form: https://rma.aranet.com/
• 

  ckent

  Posted: 06.12.2023 00:32

  Hi @aranet-techsupport

  I saw your reply to Kelvin, but I only get this error once a day, maybe once a week.  It immediately returns to normal operation after a few minutes, at the next cycle.  Does your instruction apply to me too?  It's also Error 0x8002.
• 

  aranet-techsupport

  Posted: 06.12.2023 08:17

  Hi ckent!
  
  This forum post explains the steps that need to be taken:
  https://forum.aranet.com/all-about-aranet4/error-codes-on-aranet4-display/
  First make a manual calibration of the co2 sensors. If the error keeps coming back after it, then it is faulty and probably needs an RMA.

You have to log in to reply.