two Aranet4 beside each other
barry
Posted: 15.12.2023 00:09
Modified: 30.04.2024 10:43
I have two Aranet 4 units. One was being given away as a gift. When I put them beside each other (very close) they do not register the same numbers. Any idea why that would be? They were purchased less than a week apart so I used all factory settings on both. I have left them for 5 hours beside each other and the numbers are different. Any ideas?
aranet-techsupport
Posted: 15.12.2023 08:22
Hi!
No 2 sensors are exactly the same and the shown measurment is not actually the true value, the true value lies somewhere in the zone of the shown value +/- the accuracy. You can find the accuracies for the Aranet4 parameters in the datasheet here:
https://cdn.bfldr.com/FS48XT6B/at/k9b9wjnv8f455crkp7846j/Aranet4_datasheet_v25_WEB.pdf
And here is a video on how to interpret the information there:
https://www.youtube.com/watch?v=ukUtG9CWdOc&t=66s.
If the 2 accuracy "zones" of the 2 Aranet4's overlap, then there is no need to worry and your devices are fine.
You have to log in to reply.